#include "Arduino.h"
#include <fauxmoESP.h>
#include <ESP8266WiFi.h>


fauxmoESP fauxmo;



// Replace with your network credentials
const char *ssid = "FRITZ!BoxWZ";
const char *password = "40360548708873074408";
IPAddress ip(192, 168, 178, 14);
IPAddress subnet(255, 255, 255, 0);
IPAddress gateway(192, 168, 178, 1);

const char* serverhost = "192.168.178.12";


void httpConnect() {
	WiFiClient client;

	  Serial.printf("\n[Connecting to %s ... ", serverhost);
	  if (client.connect(serverhost,88))
	  {
	    Serial.println("connected]");

	    client.println("PUT /ledDemoOn");
	delay(10000);
	    client.println("PUT /ledDemoOff");
	delay(10000);
	    Serial.println("[Response:]");
	    while (client.connected() || client.available())
	    {
	      if (client.available())
	      {
	        String line = client.readStringUntil('\n');
	        Serial.println(line);
	      }
	    }
	    client.stop();
	    Serial.println("\n[Disconnected]");
	  }
	  else
	  {
	    Serial.println("connection failed!]");
	    client.stop();
	  }
	  delay(5000);
}

void setup() {

    Serial.begin(115200);


    if (connectWifi()) {
    	fauxmo.addDevice("LED Schrank");
    	fauxmo.addDevice("LED Fernseher");
    	fauxmo.addDevice("LED Demo");

  	    fauxmo.enable(true);

  	    //fauxmo.onMessage(fn)

  	    fauxmo.onMessage([](unsigned char device_id, const char * device_name, bool state) {
  	    	Serial.printf("[MAIN] Device #%d (%s) state: %s\n", device_id, device_name, state ? "ON" : "OFF");
  	    	httpConnect();
//  	    	HttpClient client;
//
//  	    	if (state == true) {
//  	    		client.begin("http://192.168.178.12:88/ledDemoOn");  //Specify request destination
//  	    	} else {
//  	    		client.begin("http://192.168.178.12:88/ledDemoOff");  //Specify request destination
//  	    	}
//  	    	int httpCode = client.GET();
//  	    	String payload = client.getString();
//  	    	Serial.println(payload);
//  	    	Serial.println("Test");
//  	    	client.end();
  	    });

    }



}

// ------------ FINISH -----------------
boolean connectWifi() {
  boolean stat = true;

  // Connect to Wi-Fi
  WiFi.config(ip, gateway, subnet); // uncomment for dynamic IP
  WiFi.begin(ssid, password);
  int count = 0;
  while (WiFi.status() != WL_CONNECTED) {
    count++;
    digitalWrite(D4, LOW);
    delay(1000);
    digitalWrite(D4, HIGH);
    Serial.println("Connecting to WiFi..");
    if (count == 10) {
      stat = false;
      break;
    }
  }
  if (stat == true) {
    digitalWrite(D4, LOW);
    // Print ESP Local IP Address
    Serial.println(WiFi.localIP());
  }
  return stat;
}

void loop() {
    fauxmo.handle();
}